Hu Y. and Ameta G., "A Charts Based Approach to Estimate Disassembly Time:Hypothesis, Model and Validation", JMSE, accepted.
Huang H. and Ameta G., 2016, "An XML Based Machining Energy Estimation Tool From Process Plans", International Journal of Computer Integrated Manufacturing, Vol 29, Issue 1, pp 107-118.
Hu Y., Srinivasan R., Spoll J., and Ameta G., "Graph Based Method and Tool for Complete and Selective Disassembly Time Estimation in Early Design", Journal of Computers and Information Science in Engineering, Vol 15(3), September 2015, 10pp.
Gill A., "Hybrid uncertainty quantification methodology in Product Life-Cycle Assessment", M.S. Thesis, May 2014, Washington State University, Pullman, WA.
Huang H. and Ameta G., "A Novel Pattern for Energy Estimation Framework and Tools to Compute Energy Consumption in Product Life Cycle", Journal of Computing and Information Science in Engineering, ASME Transactions, March 2014, 14(1), 12 pages
Huang H. and Ameta G., "Computational energy estimation tools for machining operations during preliminary design", International Journal of Sustainable Engineering, Taylor and Francis, 7(2), pp 130-143
Diaz J., Hu Y. and Ameta G., "Poster:Weighted Graph based metrics for Assembly Time Estimation in Preliminary Design", Summer REU, Washington State University, Pullman, WA, 2014.
Shankar A., "Novel Geometric Metric for Uncertainty Accumulation in Life Cycle Assessment", M.S. Thesis, Dec 2013, Pullman, WA.
Hu Y., "Automatic Selective Assembly Time Estimation and Assembly Architecture Redesign Suggestions", M.S. Thesis,July 2013, Washington State University, Pullman, WA.
Mani M., Johansson B., Lyons K., Sriram R.D. and Ameta G., "Modeling, Simulation and Analysis for Sustainable Product Realization", International Journal of Life Cycle Assessment, Vol. 18(5), June 2013, pp 1129-1136.
Ameta G., "Establishing the Energy Profile for Geometric Variations of a Planar Surface", Procedia CIRP, Elsevier, Vol. 10, pp 294-298.
Pezeshki C, Panchal J. and Ameta G., "Blueprints for Teaching Ecodesign and Sustainability to University Students - Blueprints for Success", In Handbook of Sustainable Engineering, Editors Wolfgang Wimmer and Joanne Kauffman, Springer, Dordrecht, Netherlands.
Hu Y. and Ameta G., "LIFE-CYCLE ASSESSMENT AND ECO-DESIGN OF A WIRELESS TV/VCR REMOTE", Proceedings of American Society of Mechanical Engineering- International Design Engineering Technical Conference-2013/ Computers and Information in Engineering-12484, Portland, OR, USA, Aug 4-7.
Spoll J., Hu Y. and Ameta G., "Poster: Validating Complete Disassembly and Selective Disassembly Time Estimation ", Summer REU, Washington State University, Pullman, WA, 2013.
Hu Y. and Ameta G., "Poster: Graph based automatic computation of product disassembly and selective disassembly time from assembly models, CIE Poster session, International Design Engineering and Technical Conference - 2013. Portland, OR, USA, Aug 4-7.
Hu Y. and Ameta G., "Poster: Graph based automatic computation of product disassembly time from assembly models", Wiley Research Exposition, 2013, WSU, Pullman, WA.
Raman A., and Ameta G., "Novel Multi-Dimensional Geometric Metric for Uncertainty in Life-Cycle Assessment", Wiley Research Exposition, 2013, WSU, Pullman, WA.
Huang H., "A CAD-Based Software Framework for Estimating Energy Through a Product Lifecycle", Ph.D. Dissertation, 2012, Washington State University, Pullman, WA.
Ameta G., "Towards Establishing the Energy Profile for Geometric Variations of a Planar Surface", 12th CIRP Conference on Computer Aided Tolerancing, University of Huddersfield, 18th - 19th April 2012.
Srinivasan R., Hu Y.. and Ameta G., "Poster:Estimating Selective Disassembly Time using Disassembly Graph based on Connective Complexity Metrics", CIE Poster Award, International Design Engineering Technical Conference-2012/ Computers and Information in Engineering, Chicago, IL, USA, Aug 11 - 14, 2012.
Ameta G., Rachuri S., Fiorentini X., Mani M., Fenves S. J., Lyons K., and Sriram R., "Extending the notion of quality from physical metrology to information and sustainability", Journal of Intelligent Manufacturing, Vol. 22(5), pp737-750, 2011
Srinivasan R., "Sustainability Analysis and Connective Complexity Method for Selective Disassembly Time Prediction", MS Thesis, 2011, Washington State University, Pullman, WA.
Hawthorne B. and Ameta G., "LCA Study And Comparison Of Two Multispeed Blenders", Proceedings of American Society of Mechanical Engineering- International Design Engineering Technical Conference-2011/ Computers and Information in Engineering-48612, Washington DC, USA, Aug 28 - 31.
Srinivasan R. and Ameta G., "Comparison of Life-Cycle Assessment of Two Toasters", Proceedings of American Society of Mechanical Engineering- International Design Engineering Technical Conference-2011/ Computers and Information in Engineering-48772, Washington DC, USA, Aug 28 - 31.
Zhenghui S. and Ameta G., "Life-Cycle Asssessment of an Electric Rice Cooker: A Case Study", Proceedings of American Society of Mechanical Engineering- International Mechanical Engineering Congress - 2011 (paper no. 64356), Denver, CO, Nov 13-16.
Ameta G., Panchal J. and Pezeshki C., "A Collective-Learning Approach to Sustainable Design Education", International Journal of Engineering Education, Vol 26(2), pp 265-270, 2010.
Ameta G. and Sarkar P., "Comparison of Electronics Products Standards for Sustainability", International Journal of Product Design, 1(1), 2010.
Huang H. and Ameta G., "Towards a Computational Framework for Energy Estimation: Needs, Requirements, and Its Generic Shell", Proceedings of American Society of Mechanical Engineering-Manufacturing Science and Engineering Conference-2010, Montreal, CA, USA, Aug 15 - 18.
Noah G. and Ameta G., "Poster: Towards a Multidimensional Geometric Metric for Sustainability", Summer REU, 2010.
Srinivasan R. and Ameta G., "Poster: Use - phase energy impact of two toasters: towards sustainable selective disassembly planning", Proceedings of American Society of Mechanical Engineering-Manufacturing Science and Engineering Conference -2010, Erie, PA, Oct 12-15.
Mani M., Johansson B. J., Lyons K. W., Sriram R. D., Ameta G., "Modeling, Simulation and Analysis for Sustainable Product Development", NISTIR 7745, Nov 2010, link
Ameta G., Mani M., Rachuri S., Lyons K.W., Feng S.C., and Sriram R.D., "Carbon Weight Analysis for Machining Operation and Allocation for Redesign", International Journal of Sustainable Engineering, Vol 2(4), December 2009.
Huang H. and Ameta G., "Towards a Design Framework for Bi-Level Estimation of Turning Energy for Parts and Assemblies", Proceedings of American Society of Mechanical Engineering-Manufacturing Science and Engineering Conference-2009, West Lafayette, IN, USA, Oct 4 - 7.
Ameta G., Huang H. and Mahesh M., "A Bi-level Framework for Estimating Manufacturing Energy and Carbon Weights of Milled Parts and Assemblies", Proceedings of American Society of Mechanical Engineering-International Design Engineering Technical Conference-2009/ Computers and Information in Engineering-86805, San Deigo, CA, USA, August 30 - September 29.
Ameta G., "Design for Sustainability - Overview and Trends", The 17th International Conference on Engineering Design, 24th -27th August 2009, Stanford University, Stanford, CA.
Ameta G., "Towards a New Geometric Metric for Sustainability Assessment", PerMis Conference, NIST, Gaithersburg, MD, USA, September 21st-23rd 2009.
Ameta G., Panchal J. and Pezeshki C., "A Collective-Learning Approach to Sustainable Design Education", Mudd Design Workshop VII, 28th May 2009.
Ameta G., Mani M., Rachuri S., Lyons K. W., Shaw F., Sriram R. D., "Carbon Weight Analysis for Machining Operation and Allocation for Redesign", NISTIR 7560, Dec 2009, link
Mani M., Lyons K.W., Rachuri S., Ameta G., Subrahmanian E., Sriram R.D. and Feng S.C., "Introducing Sustainability early into Manufacturing Process Planning", Paper No- 48517, Proceedings of the 14th International Conference on Manufacturing Science and Engineering, Evanston, IL, USA, October 7-10, 2008.
Ameta G., Rachuri S., Fiorentini X., Mani M., Fenves S. J., Lyons K. W., Sriram R. D., "Extending the Notion of Quality from Physical Metrology to Information and Sustainability", NISTIR 7515, July 2008
Ghadge K., Vishwanathan S., Devadula S., Langfitt Q., Chan S. H., Ratnakar G. K., Ameta G., Gupta A., Rachuri S., & Chakrabarti A. (2017, January). Application of InDeaTe Design Tool for Designing Sustainable Manufacturing Systems-Case Study of a Micro-hydel Turbine. In International Conference on Research into Design (pp. 313-323). Springer, Singapore.
Acharya S., Ghadge K., Langfitt Q. M., Pezeshki C., Ameta G., Rachuri, S., & Chakrabarti A. (2017, January). Supporting sustainable product design: a case study with InDeaTe tool and template at Washington State University, Pullman, WA. In International Conference on Research into Design (pp. 209-224). Springer, Singapore.
Devadula S., Ghadge K., Vishwanathan S., Chan S. H., Langfitt Q., Dornfeld, D., Gupta A., Rachuri S., Ameta G., & Chakrabarti A. (2017, January). Supporting Social Innovation: Application of InDeate Tool for Sustainable Service Design-Case Study of Community Workshops. In International Conference on Research into Design (pp. 139-151). Springer, Singapore.
Ghadge K., Vishwanathan S., Devadula S., Langfitt Q., Chan S. H., Patel, A., Ameta G., Gupta A., Rachuri S., & Chakrabarti A. (2017, January). Application of InDeaTe Design Tool for Designing Sustainable Products-Case Study of a Natural Water Cooler. In International Conference on Research into Design (pp. 291-300). Springer, Singapore.
Uchil P., Ghadge K., Acharya S., Bhinge, R., Robinson S., Dornfeld D., Rachuri S., Ameta G., & Chakrabarti A. (2017, January). Supporting manufacturing system design: a case study on application of InDeaTe design tool for a smart manufacturing system design. In International Conference on Research into Design (pp. 325-335). Springer, Singapore.
Acharya S., Ghadge K., Uchil P., Flynn, C. D., Johnson A. J., Squier M. N., Yang Y., Yang X., Davidson C., Ameta G., Rachuri S., & Chakrabarti A. (2017, January). Supporting sustainable service-system design: a case study on green-roof design with InDeaTe template and tool at syracuse, New York. In International Conference on Research into Design (pp. 19-33). Springer, Singapore.
Chakrabarti A., Acharya S., Ranjan B. S. C., Devadula S., Ghadge K., Madhusudanan N., Uchil P., Vishwanathan S., Ameta G., & Rachuri S. (2017, January). InDeaTe-A Computer-Based Platform with a Systematic Design Template and a Database of Methods and Tools. In International Conference on Research into Design (pp. 277-289). Springer, Singapore.